So i am planning to add a pixel tree for this year however looking through the forum on Mega Trees not seeing anything similar to what i am planning and wanted to get opinions on sizing. The part i do know, I already have 16 strings of 25 CT GECE's to use, and i'll be using either the e680 or e682 i have as well.
My front yard it pretty small and my options of where to put my tree pretty much limits me to one spot. Due to this I don't want to block the rest of the house/display with a 12-15ft plus tree. I am thinking of a full tree with the 16 strings, and having the lit portion to about 8 ft. with the base hoop about 4.75 to 5 ft in diameter and the top of the tree at about 6.5 to 7 in in diameter. With the planned 8ft height of the lit portion, the spacing on the pixels would be just over 3 inches.
The main things i am looking for opinions on is should i go with a full tree or a half tree? I don't really plan on doing any text scrolling, and with the vertical spacing being fairly tight on the pixels the horizontal spacing i came up with would be similar to a taller tree with more strings so not sure "fullness" would be an issue. Also is the pixel spacing too tight? Should i bump up the either a foot or two to make the pixel spacing closer to the more typical 4 in (100mm)?
I am open to any other suggestions as well.
My front yard it pretty small and my options of where to put my tree pretty much limits me to one spot. Due to this I don't want to block the rest of the house/display with a 12-15ft plus tree. I am thinking of a full tree with the 16 strings, and having the lit portion to about 8 ft. with the base hoop about 4.75 to 5 ft in diameter and the top of the tree at about 6.5 to 7 in in diameter. With the planned 8ft height of the lit portion, the spacing on the pixels would be just over 3 inches.
The main things i am looking for opinions on is should i go with a full tree or a half tree? I don't really plan on doing any text scrolling, and with the vertical spacing being fairly tight on the pixels the horizontal spacing i came up with would be similar to a taller tree with more strings so not sure "fullness" would be an issue. Also is the pixel spacing too tight? Should i bump up the either a foot or two to make the pixel spacing closer to the more typical 4 in (100mm)?
I am open to any other suggestions as well.