I'm using V3.0.5.19 and V3.0.5.20 and seem to have some serious issues outputting E1.31 data. I've got everything setup for a large 226 pixel concentric star (Elements setup, color filters applied, Controller setup). I had it working last night after a bit of trouble. Now I can't seem to get it working at all.
I've verified that the star and the E682 are working as they respond to SACNview commands, and I can see the network activity when Vixen is open. Actually, it gets better. The E682 registers the incoming data packets! If I have vixen open and SACNview running the star goes into seizure mode as the E682 is receiving multiple commands for the same channels. This tells me that Vixen is sending out values of 0 straight across the board when playing back a sequence. It also appears to be sending all values of 0 as long as it is open, regardless of playback (unsure if this is a feature or a bug).
I've verified that the star and the E682 are working as they respond to SACNview commands, and I can see the network activity when Vixen is open. Actually, it gets better. The E682 registers the incoming data packets! If I have vixen open and SACNview running the star goes into seizure mode as the E682 is receiving multiple commands for the same channels. This tells me that Vixen is sending out values of 0 straight across the board when playing back a sequence. It also appears to be sending all values of 0 as long as it is open, regardless of playback (unsure if this is a feature or a bug).